Top 3 P&S Detail Products as recommended by MD Detailing

 

 

 

 

 

Bead Maker

 

P&S Bead Maker makes paint protection sealant easier and faster than ever before. Bead Maker's unique formulation allows for quick spray application. 

 

This product is a real timesaver using binding polymer monomer technology to seal the paintwork of the vehicle and produce a brilliant shine and water beading with a long-lasting finish. 

 

Applied to wet or dry vehicles, Bead Maker is safe to spray on all exterior surfaces including the plastics. 

 

Bead Maker has a combination of UV filter and UV stabilisers, making it UV Protected. This is great on the plastics to avoid getting that faded look. 

 

What makes Bead Maker different is the surface migrating molecule that attaches to the paint surface of a vehicle. Once attached this molecule cross-links and polymerises on the surface, building a hydrophobic durable layer of paint protection.

 

Cure time is essentially two hours depending upon ambient conditions.

 

This doesn’t replace a professional ceramic coating, but it’s a great way to achieve a layer of temporary paint protection for your vehicle and brilliant shine between your washes. 

 

We love the effect of the rain on the windscreen as we’re driving. An arch of tiny glass-like beads of water are left behind the trail of the wipers, and large water crystals roll down the window from the roof. No dirty smears from the wipers. Just a clean glossy shine.

 

This layer of P&S Bead Maker makes your next wash a breeze too. The dirt and elements since its last wash glide off easily.

 

P&S Detail Products is an American Brand, but our online shop at MDDetailing.uk is a UK stockist. 

 

Subscribe to the website to be notified of offers, new products and ranges.

 

To book your car in for its next car detail and perhaps ceramic coating, do have a look at our packages on offer and get in touch with us.

 

Iron Buster

 

P&S Iron Buster is a deep wheel cleaner and an iron decontaminant.

To use: 

Spray behind and on front of the wheel.

 

You can see the liquid changing colour from yellow to purple. This is a chemical reaction with the iron. The formula pulls away the iron from surface and it drips downwards. We call this process, ‘iron fallout’.

 

Using a non-scratch brush like the EZ Brushes set, clean deep into the barrel of the wheel and the Easy Go brush for the wheel arches.

 

Then use a tyre medium such Brake Buster on the wheel area with a boars-hair brush like the ValetPRO range of brushes.

 

Be sure to rinse off the iron fallout thoroughly until the water runs clear from the top of the wheel, down and get in all those nooks and crannies. You can also use it on the paintwork of the body of the vehicle. The bonnet and under the front of the car, sides and back of the car (boot, and under too) all have iron particles landing there. 

Iron buster, although pulls away the iron from the paintwork, is very gentle and doesn’t hurt the surface of your car. A warning though, if this step is missed out before you polish your car, you will be polishing these particles into your paintwork, causing scratching and swirls. If your car has particularly sensitive paintwork, you can spray some water on first, it will still work as well.

You can spray foam, such as the P&S Pearl Shampoo after application of the iron buster as this allows you to pull the iron buster off to the surface easier.

Rinse the car thoroughly from top to bottom. 

Do not let this product dry. 

 

For car detailing, P&S Iron Buster is a fantastic product. It is a step in the preparation and cleaning of the vehicle that will not only give great cleaning and decontamination results but will also ensure that your polishing and cleaning work later, will have a clear surface to work on, and not be made worse by grinding in iron particles to your paintwork.

The colour change is a brilliant indicator that it is doing its stuff, and quickly at that! You can see exactly where the fallout is occurring and you can ensure you have rinsed it all off too by making sure the purple colour has run clear.

 

Where can I get it?

P&S Detail Products is an American Brand, but our online shop at MDDetailing is a UK stockist. Subscribe to the website to be notified of offers, new products and ranges.

To book your car in for its next car detail and perhaps ceramic coating, do have a look at our packages on offer and get in touch with us.

 

Brake Buster

P&S Brake Buster lifts away oil, brake dust and grime from your wheels. This is an all in one tyre and wheel cleaner and it’s completely safe as its non-acidic.

It has rust inhibiters which replaces the acidic formulars that were not only damaging to the car, but to your health too.

Brake Buster foams and lathers really well and works brilliantly with the IK Foam Sprayer at dilution rate of about 1:5 or more product may be required, depending on how soiled the wheels are. The ValetPRO boars-hair brush for the face of the wheels work brilliantly.

This formula is very dilutable. You can dilute it according to how dirty your wheels are or if you want it to lather up more. This is not only a product saving bonus but it will save you money too.


 

Do not let this product dry.


 

Where can I get it?

P&S Detail Products is an American Brand, but our online shop at www.MDDetailing.co.uk/shop is a UK stockist. Subscribe to the website to be notified of offers, new products and ranges.

To book your car in for its next car detail and perhaps ceramic coating, do have a look at our packages on offer and get in touch with us.

Our Top 3 P&S Detail Products .png

As with all car detailing products on the MD Detailing online shop, we only stock the best, tried and tested car care products. We've either tried them out ourselves, or they've come highly recommended by other reputable car detailers whose opinions we respect and agree with. 

 

Today we want to talk to you about our 3 favourite P&S Detail products.